The Megger technical library provides access to a range of additional content and resources such as technical guides, application notes and more. Use the filters to browse specific content (e.g. application notes) or refine your search to a particular electrical application area.
If you would like to see the content we have available on a particular subject or need to locate some software, simply enter a search below. Please note, you will need to create an account to access some resources.
Filter by application type:
BITE2 Terminal Impedance Mode
The NERC (North American Electric Reliability Corporation) now requires that the contact resistance from the charger connections to the battery terminals are measured. The BITE2 saves measurement data in cell strap combinations. When starting a test the BITE2 will prompt you to measure Cell 1. Starting on cell 1 does not allow for the measurement of the positive charger connection to the terminal.
Published: 16 March 2020
PowerDB auto limits
Power DB can now automatically set your battery limits based on the type of battery being tested. Simply select the battery type and let Power DB set the limits.
Published: 24 February 2020
TTRU3 Calibration verification
When performing calibration verification of the TTRU3, the following factors need to be considered to achieve accurate measurements and prevent damage to your calibration fixture or TTRU3.
Published: 20 February 2020
Software download files for FREJA
Published: 13 January 2020